Phenyl Sanarose 6FF（HS）
Classify :
Phenyl
Keyword：
SANJI TECH
Product Features
Product Details
Product Introduction
Phenyl Sanarose 6FF (HS) is a hydrophobic chromatography medium using Sanarose 6FF as the matrix and benzene as the functional ligand. It has the advantages of high hardness, fast flow rate, strong selectivity, high activity recovery rate, and no pollution to the environment. It can withstand strong acids and alkalis, and can be cleaned in place and sterilized at high temperatures. Compared with reverse phase chromatography medium, the ligand concentration is low and the elution conditions are mild, which can better maintain the biological activity of the sample.
Hydrophobic interaction chromatography is a chromatographic technique established based on the hydrophobic effects between solutes, polar mobile phases, and non polar stationary phase surfaces; In hydrophobic chromatography, binding force is mainly affected by ligand type, buffer salt, chromatography temperature, pH, and other factors. Phenyl Sanarose 6FF (HS) is widely used in the laboratory and downstream stages of biotechnology, and is commonly used for capture and moderate purification in typical three part purification strategies; It has the characteristics of "high salt absorption and low salt concentration elution" and can be combined with other separation technologies.
Technical Parameter
|
Media |
Phenyl Sanarose 6FF (HS) |
|
Matrix |
6% highly cross-linked agarose |
|
ligand |
Phenyl |
|
ligand concentration |
40μmol/ml glue |
|
Recommended flow rate |
300cm/h (adjusted according to column size) |
|
Particle size range |
45~165μm |
|
Average particle size |
90μm |
|
Tolerance to stress |
0.3Mpa |
|
PH tolerance |
Short-term: 2~14; work PH: 3~13 |
|
Chemical stability |
Commonly used hydrophobic chromatography buffer, 1M sodium hydroxide, 6M guanidine hydrochloride, 70% ethanol, 30% isopropyl alcohol, 1M acetic acid. |
|
Save |
20% ethanol, 4~30℃, preferably refrigerated, do not freeze, and replace the storage solution regularly. |
|
Cleaning and Regeneration |
It can be soaked in 1 M NaOH solution for 1 to 2 hours to achieve sterilization effect; 1 M NaOH, 70% ethanol, 30% isopropyl alcohol, ultrapure can be used according to the type of contaminants. Flush multiple column volumes with water to achieve the effect of cleaning and regeneration. |
Product ordering information
|
Product name |
Article number |
Specifications |
|
Phenyl Sanarose 6FF (HS) |
NPL00025 | 25ml |
|
NPL00100 |
100mL |
|
|
NPL00250 |
250mL |
|
|
NPL00500 |
500mL |
|
|
NPL01000 |
1L |
prepacked column
|
Product name |
Article number |
Specifications |
|
Phenyl Sanarose 6FF (HS) |
NPhYZ001 |
1ml(7*25) |
|
NPhYZ05A |
5ml(16*25) |
|
|
NPhYZ05X |
5ml(8*100) |
Contact Us
About us
Address: 5th floor, building 12, Xiamen biomedical collaborative innovation and entrepreneurship center, 71 HouXiang Road, Haicang District, Xiamen