BS HP.jpg
+
  • BS HP.jpg

Butyl Sanarose HP

Classify :

Butyl

Keyword:

SANJI TECH


Product Features

Butyl Sanarose HP is a high-resolution hydrophobic chromatography medium using Sanarose 4FF as the matrix and butyl as the functional ligand. Compared with Butyl Sanarose 4FF, it has a narrower particle size range, high resolution, strong pressure resistance, fast flow rate, and good selectivity. It can withstand strong acids and alkalis, and can be cleaned in place and sterilized at high temperatures.

Product Details


Product Introduction

     Butyl Sanarose HP is a high-resolution hydrophobic chromatography medium using Sanarose 4FF as the matrix and butyl as the functional ligand. Compared with Butyl Sanarose 4FF, it has a narrower particle size range, high resolution, strong pressure resistance, fast flow rate, and good selectivity. It can withstand strong acids and alkalis, and can be cleaned in place and sterilized at high temperatures.
Hydrophobic interaction chromatography is a chromatographic technique established based on the hydrophobic effects between solutes, polar mobile phases, and non polar stationary phase surfaces; In hydrophobic chromatography, binding force is mainly affected by ligand type, buffer salt, chromatography temperature, pH, and other factors. Butyl Sanarose HP is widely used in the laboratory and downstream stages of biotechnology, and is often used for moderate purification in typical three part purification strategies.

 

Technical Parameter

Media

Butyl Sanarose HP

Matrix

4% highly cross-linked agarose

ligand

Butyl

ligand concentration

50μmol/ml medium

Recommended flow rate

<150cm/h (adjusted according to column size)

Particle size range

24~44μm

Average particle size

34μm

Tolerance to stress

0.3Mpa

PH tolerance

Short-term: 2~14; work PH: 3~13

Chemical stability

Commonly used hydrophobic chromatography buffer, 1M sodium hydroxide, 6M guanidine hydrochloride, 70% ethanol, 1M acetic acid.

Save

20% ethanol, 4~30℃, preferably refrigerated, do not freeze, and replace the storage solution regularly.

Cleaning and Regeneration

It can be soaked in 1M NaOH solution for 1 to 2 hours to achieve the sterilization effect, or it can be sterilized by high pressure for 30 minutes; 1M NaOH, 70% ethanol, 30 % isopropyl alcohol, ultrapure water, etc. flush multiple column volumes to achieve the effect of cleaning and regeneration.

 

 

Product ordering information

Product name

Article number

Specifications

Butyl Sanarose HP

NBH00100

100mL

NBH00250

250mL

NBH00500

500mL

NBH01000

1L

 

 

prepacked column

Product name

Article number

Specifications

Butyl Sanarose HP

NBHYZ001

1mL(7*25)

NBHYZ05A

5mL(16*25)

NBHYZ05X

5mL(8*100)

 

 

 

Contact Us